This Article Contains
- What is Code P0572?
- What Does Code P0572 Mean?
- What Triggers The P0572 Code?
- Symptoms Associated With Code P0572
- Is The P0572 Code Critical?
- How Is The P0572 Diagnosed?
- How Is the Code P0572 Fixed?
- The Easiest Solution To P0572 Code Problems
- 4 P0752 FAQs
Let’s dive in.
What is Code P0572?
This code is defined as “Cruise Control / Brake Switch ‘A’ Circuit Low” and indicates a malfunction in the cruise control or brake switch.
The letter “A” can refer to a particular wire, connector, harness, and so on. To figure out which component the “A” is tied to, your mechanic will need to look up the appropriate vehicle service manual and possibly the car’s wiring diagram.
What Does Code P0572 Mean?
The P0572 code means that your ECM has detected a low voltage from the brake switch circuit. When this happens, the ECM will likely disable your cruise control.
What Triggers The P0572 Code Issue?
The root cause of the P0572 code can either be a mechanical or electrical malfunction, and is often a combination of issues.
Here’s a look at some of the more common causes:
- A damaged cruise control or brake switch.
- The brake light switch isn’t adjusted correctly.
- Corroded, bent, or broken connector pins that create opens or shorts in the wiring harness.
- A wiring issue like chafed wires or wires pinched on the brake pedal.
- Debris blocks the brake light switch that creates a poor electrical connection.
- An internal short or open within the ECM circuit.
Now, what are some of the symptoms associated with code p0572?
Symptoms Associated With Code P0572
You’ll likely encounter some of these symptoms when you notice the P0572 code:
- An inoperable cruise control system (this is the most common symptom).
- Erratic cruise control response.
- The cruise control turns on, but doesn’t engage.
- The rear brake light doesn’t switch on.
- The check engine light is illuminated.
- A problem with cruise control functions (like Set, Resume, or Accelerate).
Is The P0572 Code Critical?
On its own, no — the P0572 code isn’t critical.
It doesn’t affect the driveability of your car as it only indicates a malfunction in the cruise control system. Your worst-case scenario here is no cruise control.
However, the real answer depends on the cause of the DTC.
If your rear brake switch isn’t working correctly, the rear brake light won’t turn on when you press the brake pedal, compromising your road safety.
Things like a bad connector or contact pin can create an unstable electrical connection — resulting in an intermittent P0572 code. When this happens, the DTC may come and go as long as the root cause isn’t resolved.
To be safe, always have your DTC diagnosed by a professional mechanic who’ll cover all the bases.
How Is The P0572 Diagnosed?
Your mechanic will begin the diagnosis by reading the stored codes with a scan tool. They’ll then test drive your car to see if the DTC returns.
If the code returns, they’ll inspect the brake light switch (located at the brake pedal) for any mechanical problem or necessary adjustments.
Though the brake light switch is often the problem, other likely culprits need to be ruled out as well. They may also test each fuse, check the wiring harness, or the ECM to eliminate possible causes one by one.
How Is the Code P0572 Fixed?
Replacing a faulty brake light switch is the most common fix for the P0572 code.
However, other repairs could be:
- Adjusting the brake light switch.
- Replacing a blown fuse (or fuses).
- Replacing a defective brake pedal and brake light switch.
- Replacing or repairing faulty wiring, connectors, and so on.
- Replacing a faulty cruise control module.
Now, what’s the best way to get your P0572 code resolved?
The Easiest Solution To P0572 Code Problems
You’ll want a reliable, expert mechanic or dealer to diagnose your problems and conduct thorough repairs.
That’s why, when looking for a mechanic, make sure that that they:
- Are ASE-certified.
- Use only high-quality replacement parts and tools.
- Offer a service warranty.
And lucky for you, RepairSmith is just a few clicks away!
RepairSmith is a convenient mobile vehicle, repair and maintenance solution.
Here are some of the benefits they offer:
- OBD code diagnoses and fixes can be made right in your driveway
- Online booking is convenient and easy
- Competitive and upfront pricing
- Expert, ASE-certified technicians perform the vehicle inspection and servicing
- All repairs and maintenance are executed with high-quality equipment and replacement parts
- RepairSmith provides a 12-month | 12,000-mile warranty for all repairs
Curious how much this might cost?
RepairSmith typically charges between $95-$150 for a diagnosis, based on your location. This diagnosis fee can be added to the final cost of the repair if you decide to get the repairs done.
For reference, a brake light switch replacement could cost you anywhere between $50-$160. This price can vary based on your location, the make and model of your vehicle and other factors.
For an accurate estimate, just fill this online form.
Now that we’ve covered the basics of the P0572 code, let’s look at some FAQs.
4 P0752 FAQs
Here are some answers to four questions you may have.
1. What’s A DTC?
A diagnostic trouble code is a code generated by the onboard diagnostics (OBD) system of a car or bike engine. It’s sometimes called the OBD code or engine fault code and helps pinpoint the cause of a particular problem.
Note: OBD-II is the second generation of onboard self-diagnostics.
2. What’s A Generic DTC?
A generic DTC means that the code indicates the same problem for any vehicle, regardless of the car models. The OBD-II code will reflect the same issue in an Audi, Chevrolet, or even a Kia.
3. What’s The ECM?
The engine control module (ECM) is the central computer of the car. It monitors different sensor arrays and switches related to engine functionality.
It’s also known as the:
- Powertrain control module (PCM)
- Engine control unit (ECU)
4. What’s The Brake Switch?
The brake switch (or brake light switch) is a switch linked to the brake pedal and ECM circuit. It’s mounted on the brake pedal arm.
It has multiple functions, from releasing the automatic transmission lever from ‘park’ to activating the brake light. It deactivates cruise control while driving and lets the engine start when the brake pedal is depressed.
Diagnosing DTC codes isn’t as straightforward as it looks, so if you see the P0572 code pop up, get a mechanic to look at it.
Luckily, all you have to do is contact RepairSmith and let their ASE-certified professionals worry about it — so you don’t have to!