Home
Estimates Trouble Codes P0401

P0401: Exhaust Gas Recirculation Flow Insufficient Detected

Our mobile mechanics can quickly diagnose a P0401 trouble code and bring the shop to you 7 days a week. Get a quick and fair quote today.

Find Your Cost

4.8
(2,074 Reviews)

What Is P0401?

The fault code P0401 is defined as “Exhaust Gas Recirculation Flow Insufficient Detected” (or EGR Flow Insufficient). This diagnostic trouble code (DTC) gets triggered when the engine control module (ECM) detects insufficient exhaust gas recirculation flow into the intake manifold

When your vehicle’s cylinders reaches extremely high temperatures, it produces harmful exhaust gas emissions like Nitrogen Oxide (NOx). The EGR system helps curb these NOx emissions by recirculating the EGR gas into the engine where it’s burned. 

The EGR system comprises three critical components — an EGR valve, an EGR solenoid, and a DPFE sensor (Differential Pressure Feedback Electronic.) These components ensure your vehicle’s engine receives the exact amount of recirculated EGR gas specified by the ECM. 

However, a faulty EGR valve, EGR solenoid, or DPFE sensor could cause an EGR flow malfunction, resulting in the DTC P0401 and Check Engine Light flashing on your dashboard.

Common Symptoms

Symptoms of fault code P0401 can vary significantly depending on the severity of the issue. 

Here are some prominent signs pointing to this trouble code:

1. Engine Pinging or Knocking

If you’ve noticed your engine producing a pinging or knocking sound, it could indicate a P0401 trouble code.

Here, a faulty EGR valve restricts the correct amount of EGR flow into your intake manifold, resulting in an abnormal combustion temperature

2. A Strong Fuel Vapor Odor

The P0401 code could get triggered due to a clogged or dirty EGR valve. When the EGR valve is not working correctly, it disrupts the EGR flow rate, resulting in carbon deposits in the exhaust manifold

A strong fuel odor from your exhaust gasses is most likely due to these carbon deposits.   

3. An Illuminated Check Engine Light

The Check Engine Light flashing on your dashboard could indicate an insufficient EGR flow caused by a fault in the EGR valve, EGR solenoid, or DPFE sensor

However, since the Check Engine Light is a common sign of various engine problems, you’ll need a scan tool like the OBD II scanner to verify if it’s due to error code P0401.

4. A Spike in NOx Emissions

A fault in the EGR system could cause an insufficient EGR flow, resulting in higher carbon deposits and NOx exhaust gas emissions. 

So, if you notice excessive smoke coming out of the exhaust pipe of your Honda, Toyota, or Ford vehicle, there could be a spike in the NOx emissions of your exhaust gasses.

Can I Still Drive?

The DTC P0401 can trigger a host of drivability issues, such as the engine misfiring or losing power while in transit, and should be addressed immediately. 

Additionally, the EGR Flow Insufficient error could be due to a faulty EGR valve, resulting in your vehicle failing the NOx emissions test required by law. 

So, if you notice the Check Engine Light on your dashboard and any P0401 code symptoms, you should get a reputable mechanic to diagnose and fix the issue.

P0401 Causes

The Exhaust Gas Recirculation System comprises many critical components, making it a little tricky to determine the exact cause of fault code P0401 but using a scan tool can help narrow it down.

That being said, here are some common triggers: 

  • Bad DPFE sensor, EGR temperature sensor, DPFE sensor hose, or EGR valve
  • A clogged EGR valve that can no longer allow the correct flow of gases
  • Excessive carbon deposits in the catalytic converter, EGR tube, or EGR sensor
  • Insufficient vacuum supply between the valve and EGR solenoid
  • A clogged EGR passage or EGR cooler 
  • A faulty engine control module
  • The temperature sensor doesn’t register a temperature change when the valve opens

Diagnosis

The fault code P0401 is a complex issue that requires appropriate tools and technical knowledge about the Exhaust Gas Recirculation System.

Here’s a general guide on how an experienced mechanic would conduct a P0401 code diagnosis:

1. Using an OBD ii scanner tool, your mechanic will scan the engine control module for fault code P0401.

2. They will then clear the Check Engine Light and existing codes, do a test drive, and see if the engine code or Check Engine Light reappears. 

3. If the fault code or Check Engine Light persists, the mechanic will visually inspect the vacuum pump and vacuum hose and all the connections to the EGR valve. These include the Exhaust Gas Recirculation solenoid, MAP sensor, and EGR temperature sensor.

4. Next, the mechanic will disconnect the EGR valve and check for an adequate vacuum supply between the valve and the EGR solenoid.

5. They’ll monitor EGR temperature sensor changes in the engine to identify when the EGR is opened.

6. They’ll then remove and check the EGR-controlled vacuum switch valve, EGR temperature sensor, and EGR port for blockages due to excessive carbon deposits.

7. If there’s carbon buildup, the mechanic will use a throttle body cleaner to remove the carbon from the EGR passage, intake manifold, vacuum hose, and throttle body.

Possible Repairs for P0401 & Costs

The repair solutions for fault code P0401 depend on the issue’s root cause.
Here are some of the most common fixes: 

  • Replace or repair a faulty or clogged EGR valve or EGR pipe
  • Replace a faulty vacuum line leading to the EGR valve or EGR solenoid to resolve a vacuum leak
  • Cleaning a clogged EGR sensor or EGR tube with a carb cleaner 
  • Replacing a faulty DPFE sensor 

Repair Costs:
The labor costs for fixing this diagnostic trouble code typically range from $100 to $400. Additionally, you’ll need to account for the cost of replacement components.

 Here are the average estimated costs (including labor charges) of some of the components: 

  • EGR solenoid: $100 to $125
  • DPFE sensor: $150 and $500
  • EGR temperature sensor: $200 to $300
  • EGR valve: $250 to $350
  • Vacuum leak: $90 to $125 

How It Works

Tell us about your vehicle

Select your vehicles year, make, and model and the repair service you need.

Book online

Get a free quote, book an appointment, and speak to a specialist – all online!

Schedule your repair

Pick a time that works best for you and our mobile mechanics will bring the shop to you.

Get a Quote

certified 12-Month | 12,000-Mile Warranty

We're here to keep you moving

Our experienced mobile mechanics are ready to help.

Get a Quote

1-Year | 12,000-Mile Warranty