Home
Estimates Brakes Brake Drum Replacement

Dodge Sprinter 3500 Brake Drum Replacement Costs

Our mobile mechanics bring the shop to you 7 days a week.
Get a quote today for your Dodge Sprinter 3500

Find Your Cost

4.8
(2,074 Reviews)

Dodge Sprinter 3500 Brake Drum Replacement Costs

AutoNation Mobile Service offers upfront and competitive pricing. The average cost for Dodge Sprinter 3500 Brake Drum Replacement is $247. Drop it off at our shop and pick it up a few hours later, or save time and have our Delivery mechanics come to you.

Car
Location
Price
2000 Dodge Durango
4.7L V8 Base • 130,000 miles
CA 94536
$133 - $163
2006 Dodge Dakota
4.7L V8 • 387,900 miles
CA 92509
$365 - $447
2018 Dodge Durango
3.6L V6 SXT Plus • 11,000 miles
CA 90806
$131 - $161
Get A Quote 12-Month | 12,000-Mile Warranty

How to Perform a Brake Drum Replacement (A General How-To)

Here’s an overview of a drum brake replacement. This isn’t a specific step-by-step guide, but a general “how-to”. Moreover, brake components are critical to your safety. If you’re not confident with car parts, it’s best to hire an auto mechanic for this brake job: 

Caution: Your brakes can release hazardous particles (brake dust) while replacing drum brakes. Always perform the replacement in a well-ventilated place. 

  1. Jack up the vehicle and ensure it’s safely secured with jack stands. 
  2. Loosen the lug nuts, and remove the wheel and tire assembly to expose the brake drum. 
  3. Detach the brake drum from the wheel hub.
    Note: Brake drums can be difficult to remove if they haven’t been serviced for a while. In this case, you can spray a brake cleaner on the entire brake assembly and let it rest for a few minutes. The brake cleaner will help loosen the rust so the drum can be pried or hammered off. 
  4. With the brake drum removed, inspect the brake shoes, wheel cylinder, springs, and the parking brake mechanism. 
  5. Use nose pliers to detach the retainer clips or springs before removing the brake shoes. If you don’t have access to nose pliers, a flathead screwdriver should help. Also, check the brake cylinder and brake line for any brake fluid leak. 
  6. Clean the brake assembly of brake dust, debris, or brake fluid. The brake cleaner comes in handy here. 
  7. Install the new brake drum and brake shoes onto the backing plate. Also, anytime brake drums are replaced, new brake shoes are required. 
  8. Use the brake adjuster star wheel or an adjuster tool to calibrate the new shoe distance from the new drum. 
  9. Reattach the tire back on and lower the vehicle to the ground.

A lot more detail is involved while replacing drum brakes, but this overview gives you an idea of what happens.

Symptoms of Failing Brake Drums

Brake drum issues can show up in several ways. It might be time for a brake service if any of these symptoms pop up:

1. Scraping Noises

When the friction material (also called the brake lining) on your brake shoes wears down, the backing plate of the shoe will start to grind against the brake drum. This produces a grinding or scraping noise when you brake. 

If unremedied, the worn brake shoes can damage the surface of the brake drum, just like a worn brake pad can damage a brake rotor.

2. Low Brake Pedal

Does it feel like that brake pedal has to travel lower than usual when you brake?

Worn brake drums create excess clearance between the brake drum and the brake shoes. So, each shoe has to travel further to push against the brake drum and generate the required friction. 

This also applies if you have worn brake shoes in your drum brake system. The thinned friction material on your drum brake shoes will result in a low brake pedal and reduced braking performance.

Note: Sometimes, low brake fluid or a brake fluid leak could also result in a soft brake pedal. 

3. Pulsating Brakes

Brake drums wear out just like the brake rotor in disc brakes. Sometimes, they wear out unevenly. 

The uneven surface of the brake drum (either on the front or rear brakes) will reflect as vibrations or pulsations in your brake pedal. This is similar to pedal vibrations caused by a warped or uneven rotor in a disc brake. 

But there’s an exception.
If you’re making an emergency stop with a vehicle fitted with an Anti-Lock Braking System (ABS), the vibration is likely the ABS actuating to help you brake safely. 

Otherwise, brake pedal pulsations are a sign to visit the mechanic for a brake repair. 

4. Parking Brake Failure

The parking brake relies on brake shoe pressure against the brake drum to keep the vehicle stationary, especially when parking on a slope. 

Parking brakes are often installed on the rear wheel, in rear drum brakes (or rear disc brakes if your car uses all-disc brake assembly).

So, if there are issues with a rear drum or rear brake shoe, the parking brake will feel loose when you engage it. Your vehicle might slip even with the parking brake lever locked on. 

5. Soft Brake Feel

When the brake lining or drum is worn down, your vehicle will take longer than usual to stop. This change in braking performance is due to less friction being generated when you press the brake pedal, making the brakes work harder.

This is often an indicator that the brake shoes and brake drum need replacing if your car has drum brakes. The same applies if your vehicle has a disc brake system — it’s usually a sign of worn brake pads and brake rotor (brake disc).

Irrespective of whether your car has brake pads or shoes, a soft brake means it’s time to get hold of some auto repair expertise to help fix your braking system.

How Much Does a Brake Drum Replacement Cost?

The average cost of replacing a bad brake drum falls between $232 to $261. 

This breaks down to:

  • Labor costs estimated at  $58-$73 
  • Brake components priced between $174-$188

The estimate for this braking system repair doesn’t include fees and taxes and doesn’t factor in the specific vehicle make or location. Additional repairs may also be required while replacing drum brakes, which may increase the final cost.

How Urgent Is a Brake Drum Replacement?

It’s unsafe to drive with a vehicle experiencing brake system issues, even if the problem may only appear to be a bad brake drum on a set of rear brakes

The best thing you can do is get your brake system checked by an auto repair professional and have a brake job done if necessary. 

4 Brake Drum Replacement FAQs

Let’s get to know drum brakes and the brake drum a little better:

1. What Is a Brake Drum?

Brake drums are components in a drum brake system. The brake drum is a metal drum, typically cast iron or aluminum, bolted to the wheel hub and rotates with it.

How does it work?
A brake wheel cylinder and a pair of brake shoes (primary shoe and secondary shoe) are mounted onto the drum brake backing plate inside the brake drum. 

When you engage the brakes, the wheel cylinder pistons push the brake shoes against the brake drum, generating friction to stop the car. This is slightly different from disc brakes found on modern cars, where brake pads squeeze a brake rotor to stop the wheel.

The drum brake is generally found on the rear wheel or rear axle (with disc brakes on the front wheels) and typically doubles as the vehicle’s parking brake. This is why drum brakes are often referred to as the rear drum brake, and the brake shoe is a rear shoe

2. How Are Brake Drum Issues Diagnosed?

An auto repair technician will inspect the brake drum for stress fractures, deep grooves, black spots (hot spots), or a blue tint that indicates the brake drum has exceeded its allowable heat range.

If any of these exist, the technician may recommend machining the drum (to resurface it) or a complete brake drum replacement.

3. Are Drum Brakes Difficult to Replace? 

Replacing the rear drum brake isn’t necessarily difficult and often only needs a basic set of hand tools and a brake adjuster tool. 

However, modern cars involve several complex brake components that require a significant amount of labor. 

Drum brakes have several small brake parts (like return springs) that can quickly cause confusion if you’re unsure where they go. Even brake shoe mounting has to be positioned specifically as one brake shoe is often longer (primary shoe) than the other (secondary shoe).

So, if a DIY sounds like too much trouble, always get a professional to handle it instead.

4. How Often Should Brake Drums Be Replaced?

The brake drum is often replaced simultaneously with drum brake shoes. This is typically between 30,000-60,000 miles. However, that number largely depends on driving conditions and habits. 

Being in frequent start-and-go traffic or aggressive brake usage will definitely wear down the brake shoes and drum faster. 

Driving in mountainous terrain will also cause more wear to your brake components. So, make sure to get regular brake service at your mechanic or dealership to keep your brake system in shape.

We're here to keep you moving

Our experienced mobile mechanics are ready to help.

Get a Quote

12-Month | 12,000-Mile Warranty