Unfortunately, do it wrong, and you may compromise the engine’s performance and lifespan.
But don’t panic.
This Article Contains:
- How To Change Oil In Your Car: Step-By-Step Guide
- 5 Oil Change FAQs
Let’s dive in.
How To Change Oil In Your Car: Step-By-Step Guide
Although an oil change may be straightforward, many car owners still get it wrong.
If you have doubts about the motor oil change process or are unsure whether you can do a good job, it’s best to request a professional mechanic’s help. They’d have the expertise and tools needed to do a proper and safe oil change.
With that said, here’s the process you should follow to change your oil:
Step #1: Verify The Amount And Type Of Engine Oil Needed
You can refer to your owner’s manual for these details and other oil-specific requirements — for example, your car’s diesel engine requires synthetic oil for optimal performance. Remember that not using the right oil can adversely affect the engine’s lubrication and lifespan.
Step #2: Prepare Your Car For An Oil Change
For this step, you’ll need a jack stand and a plastic sheet.
Spread the plastic sheet across a level surface, and then park your car on top of the sheet. The sheet will make the cleanup work more manageable if an oil spill were to occur.
After that, start your car, let it run for around five minutes (to warm up the motor oil), and then turn it off.
Hot oil flows better and takes away some of the contaminants when it’s drained. Always be careful when working with hot oil.
Next, you’ll need to:
1. Engage your parking brake
2. Use a jack to elevate your car securely
3. Install jack stands for support
4. Place wheel chocks to prevent the car from rolling
Step #3: Locate, Loosen, And Remove The Oil Drain Plug
The drain plug (aka sump plug or oil plug) is usually a long bolt head located beneath your vehicle’s oil pan (aka sump) under the engine block.
Once you find the oil drain, place an oil drain pan (aka catch pan) underneath the sump plug.
Then, use a filter wrench or ratchet to carefully and slowly loosen and remove the oil plug or sump plug from under the oil pan. If the oil drain pan isn’t placed correctly, the engine oil may spill all over the place.
Step #4: Drain The Dirty Oil Out Of The Engine
As soon as you remove the drain plug, the motor oil will start to flow out.
Keep in mind that it could take a few minutes for all car oil to drain out. Ideally, you should let the dirty oil drain till it slows to a drip.
At times, the dirty oil may flow out at an angle, so you may need to readjust the position of the oil drain pan to avoid any spills.
Step #5: Clean And Reinstall The Oil Drain Plug
With a clean cloth, wipe the oil drain plug. Then, inspect the drain plug and drain plug gasket for any signs of damage.
In case any of these parts are damaged, you’ll have to replace them.
After that, lay the rubber gasket, reinstall the oil drain plug, and tighten the plug at the manufacturer-specified torque.
Step #6: Replace The Old Oil Filter
Most modern car manufacturers recommend changing the oil filter with every other oil change, but that depends on your oil filter’s condition.
You can use an oil filter wrench to detach the oil filter.
Now, the process of replacing the old oil filter will depend on what type of oil filter your car uses:
- In a screw-on oil filter, a simple twist is enough to remove the old oil filter. And when installing the new oil filter, some engine oil needs to be applied to the O-ring for a good seal.
- For a cartridge oil filter, remove the old filter housing cap. Then, swap the old filter with the new oil filter, and reinstall the cap after you’ve made the swap.
- Be sure to apply a light coating of oil all around the rubber gasket on the top of the new oil filter. This helps create a proper seal as you tighten the new filter.
- Don’t screw the new filter on too hard. Instead, turn it until it’s “hand tight” and then just a bit more, so it’s snug.
Step #7: Pour Fresh Oil Into The Engine
After installing the oil drain plug and oil filter, it’s time to add fresh oil:
- First, remove the jack stand to lower the car back down to the ground
- Open its hood and remove the oil cap (usually has an oil can symbol)
- Slowly pour the correct quantity of new oil into the engine
Step #8: Check The Motor Oil Level
You can use the oil dipstick to check if the new oil level is correct.
Here’s how to go about it:
- First, pull the dipstick tube out from the engine and wipe it with a clean cloth
- Reinsert the oil dipstick into its tube, pushing the dipstick in
- Once again, pull out the dipstick tube and check if the oil level falls between the specified markings
However, in some cars, an oil dipstick may not be available. In such cases, you’ll need to check the electronic monitor in the car to know the car’s engine oil level.
Step #9: Start The Engine, Shut It Off, And Recheck The Oil Level
Reinstall the oil fill cap and turn on the engine.
The engine is turned on for a couple of minutes, then turned off, and allowed to sit for some time.
After that, recheck the oil level and inspect the car’s underside to check for any signs of an oil leak. If the oil level is below the specified range, top off the engine with more fresh oil.
Read more: Learn how an oil leak can get on your spark plugs, and what symptoms pop up when it does.
Step #10: Dispose Of The Old Oil
And for this, you can transfer the old oil into a container and take it to a shop selling auto parts or an oil recycling facility. In case any of these steps are beyond you, feel free to approach a professional mechanic.
Now that you know how the engine oil is changed, we’ll answer some frequently asked questions regarding oil change:
5 Oil Change FAQs
Here are answers to five commonly asked questions associated with oil change:
1. How Often Should I Change My Cars Engine Oil?
There’s no definitive answer to this question. A frequent oil change may be necessary depending on the type of oil your vehicle uses.
If your engine uses conventional oil, your motor oil may need to be changed every 3,500 to 5000 miles. On the flip side, if you’re using synthetic motor oil, the oil change intervals are usually much longer — between 10,000 and 15,000 miles.
Essentially, change your engine oil slightly before the oil change interval specified by your vehicle manufacturer.
2. What Are The Tools Required For Changing My Car’s Oil?
Here are some of the tools that you may need for an oil change:
- Socket wrench
- Oil filter wrench
- Jack stands
- Oil drain pan
- Container for old oil
- Rubber mallet
Additionally, for safety and cleanliness, you’ll need latex gloves, paper towel sets, safety glasses, and so on.
3. What Materials Are Needed For Changing My Car’s Oil?
Here are some of the materials that may be required for an oil change:
- Engine oil
- Oil filter
- Oil filter gasket
- Oil filter washer
4. Which Oil Should I Choose For My Car?
The year and model of your vehicle will determine the type of oil it needs. In newer car models the weight of your car’s motor oil will usually be printed on the oil filler cap, next to the spark plug.
Should I use synthetic oil?
Conventional oil is just as good as a synthetic blend, for most cars.
If you are unsure, don’t be sold into synthetic oil.
Ask a professional car mechanic, or consult your owners manual for oil recommendations.
5. How Much Does An Oil Change Cost?
Getting your oil changed by a professional mechanic can cost between $50 and $125.
The cost varies depending on:
- The make, year, and model of your car
- The type of engine oil used
- Your location
For a more accurate estimate, fill out this online form.
However, if you’re replacing the oil and the oil filter on your own, you can expect to spend around $75.
Changing the engine oil in your car involves several steps, and it’s crucial to do them right.
Otherwise, your engine performance and lifespan could take a hit.
Our expert mobile mechanics will come to your driveway to change your oil and take care of all your automotive maintenance needs!